Brocade Fabric OS v7.0.2e Release Notes v1.0

Fabric OS v7.0.2e Release Notes v1.0 Page 17 of 53
Supported Products and FOS Interoperability
Brocade 5410, 5480, 5424, 5450, 5460, 5470, NC-5480
v6.2.0 or later
6
Brocade DCX, 300, 5100, 5300
v6.1.0e and later
2 6
VA-40FC
v6.2.1_vfc
6
, v6.2.2 or later
6
Brocade DCX-4S
v6.2.0 or later
6
Brocade DCX with FS8-18 blade(s), Brocade Encryption Switch
v6.1.1_enc or later
6
Brocade 7800, DCX and DCX-4S with FCOE10-24 or FX8-24 blades
V6.3.0 or later
Brocade 8000
V6.1.2_CEE1 or later
Brocade DCX/DCX-4S with FA4-18 blade(s) DCX requires v6.0.x or later
6
, DCX-4S
requires 6.2.x or later
5 6
Brocade DCX 8510-8/DCX 8510-4
FOS v7.0 or later
Brocade 6510
FOS v7.0 or later
Brocade 6505
FOS v7.0.1 or later
48000 with FA4-18 blade(s), Brocade 7600
V6.2.2 or later
6
Secure Fabric OS (on any model)
Not Supported
Mi10k, M6140, ED-6064, ES-3232, ES-4300, ES-4400, ES-4500, ES-
4700 (McDATA Fabric Mode and Open Fabric Mode)
1
Direct E_Port connections are not
supported – must use FCR.
M-EOS v9.9.5 or later
McDATA ED-5000 32-port FC director
Not Supported
Multi-Protocol Router Interoperability
Brocade 7420 Not supported
Brocade 7500 and FR4-18i blade V6.2.2 and higher
4 6
McDATA SANRouters 1620 and 2640
Not Supported
NOS (VDX Platform) Interoperability
Brocade VDX6710, VDX6720, VDX6730 NOS v2.1.1 or later
7
Table Notes:
1
When routing to an M-EOS edge fabric using frame redirection, the M-EOS fabric must have a FOS-based product in
order to configure the frame redirection zone information in the edge fabric.
2
When directly attached to a Host or Target that is part of an encryption flow.
3
These platforms may not be directly attached to hosts or targets for encryption flows.
4
McDATA 1620 and 2640 SANRouters should not be used with FOS-based routing (FCR) for connections to the same
edge fabric.
5
FA4-18 is not supported in a DCX/DCX-4S that is running FOS v7.0 or later