Brocade Fabric OS v7.0.2e Release Notes v1.0

Fabric OS v7.0.2e Release Notes v1.0 Page 45 of 53
Defect ID:
DEFECT000423389
Technical Severity:
High
Summary:
Switch panic while running suppotsave with 4G blades.
Symptom:
When RTE portion of supportsave is run on a 4G blade, it may trigger a switch panic.
Probability:
Low
Feature:
FOS Software
Function:
Panic / OOM
Reported In Release:
FOS7.0.0
Service Request ID:
1094952
Defect ID:
DEFECT000429695
Technical Severity:
High
Summary:
Name Server loses FC4 type in routed environment.
Symptom:
Some hosts that make FC-4 type based Name Server queries won't be able to establish paths to
storage.
Probability:
High
Feature:
8G FCR
Function:
FCR Daemon
Reported In Release:
FOS7.0.1
Service Request ID:
1102900,1123307
Defect ID:
DEFECT000429815
Technical Severity:
High
Summary:
BR5480 exhibits snmpd crash and switch reboot when being managed by BNA.
Symptom:
BR5480 switches running in AG mode and managed by BNA exhibit snmpd crash and switch reboot.
Workaround:
Avoid managing an AG switch with BNA or have all ports connected to either N_Port or F_port or
have AG in auto policy disabled state.
Probability:
High
Feature:
FOS Software
Function:
Management Services
Reported In Release:
FOS6.4.2
Service Request ID:
1102791
Defect ID:
DEFECT000432514
Technical Severity:
Medium
Summary:
After power cycle, FC8-64 port blade that is installed incorrectly in BR8510 faults during POST
Symptom:
FC8-64 port blade faults (51) during POST. A slotpoweroff/on or reboot clears the condition.
Feature:
Diagnostics
Function:
Post Diags
Reported In Release:
FOS7.0.1
Defect ID:
DEFECT000434819
Technical Severity:
Medium
Summary:
Polling container stats every 30 seconds caused free memory decrease on blade processor.
Symptom:
Continuous decrease in free memory is observed on blade processor when polling container stat every
30 seconds.
Workaround:
Reboot FS8-18 blade or BES switch
Probability:
Medium
Feature:
Data Security
Function:
Disk Encryption
Reported In Release:
FOS7.0.2
Service Request ID:
1102253
Defect ID:
DEFECT000436215
Technical Severity:
Medium
Summary:
The thconfig command will not properly monitor a port that has SFP swapped from 8G to 16G
Symptom:
The thconfig command incorrectly reports the state of a port that has SFP swapped from 8G to 16G is
Above range.
Probability:
High
Feature:
FOS Software
Function:
Fabric Services
Reported In Release:
FOS7.0.2
Service Request ID:
1116355