Brocade Fabric OS v7.0.2e Release Notes v1.0

Fabric OS v7.0.2e Release Notes v1.0 Page 46 of 53
Defect ID:
DEFECT000436921
Technical Severity:
High
Summary:
Console print hung and caused other process to unable to complete
Symptom:
In general customer observes switch panic, unable to access switch.
Workaround:
Check console port and make sure the settings are correct
Probability:
Low
Feature:
FOS
Function:
KERNEL
Reported In Release:
FOS6.3.1_dcb
Service Request ID:
1112726
Defect ID:
DEFECT000440989
Technical Severity:
High
Summary:
BNA experiences out of memory error when obtaining or polling for encrypted LUN level info from
two encryption groups that each have 4,000 defined LUNs
Symptom:
BNA restarts after hitting an out of memory error.
Workaround:
Reboot FS8-18 blade or BES switch
Probability:
Low
Feature:
CEE-MANAGEABILITY
Function:
CAL INTERFACE
Reported In Release:
FOS7.1.0
Service Request ID:
1102253
Defect ID:
DEFECT000442080
Technical Severity:
Medium
Summary:
Making auto-tuned value persistent across reboot
Symptom:
Values from serds auto/manual tuning session are lost after poweroff/on blade or cold reboot of
switch.
Probability:
Low
Feature:
8G ASIC Driver
Function:
C2 ASIC driver
Reported In Release:
FOS7.0.2
Defect ID:
DEFECT000442422
Technical Severity:
High
Summary:
System security card is not being read on BES/FS8-18 card readers.
Symptom:
Authentication for crypto operations on BES/FS8-18 fails. In this case, BES/FS8-18 functions as an
ordinary FC switch or blade when it is powered up, but use of the encryption engine is denied as a
result.
Workaround:
Disable the systemcard feature, issue cryptocfg -- set -systemcard disable from the encryption
group leader.
Probability:
Medium
Feature:
FOS-Infrastructure
Function:
Other
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000443541
Technical Severity:
Medium
Summary:
Continuous FSS-1001 messages are seen after firmware upgrade from FOS v6.4.2a to v6.4.3c
Symptom:
Continuous FSS-1001 messages after firmware upgrade due to inconsistent Access Gateway State
Synchronization
Probability:
Low
Feature:
FOS Software
Function:
High Availability
Reported In Release:
FOS6.4.3
Service Request ID:
1143366
Defect ID:
DEFECT000445644
Technical Severity:
High
Summary:
BES went into low memory state because of “Continuous polling from BNA”
Symptom:
BES CLI Commands are failing - Operation failed: BES/FS8-18 blade is not present or up
Probability:
Medium
Feature:
FOS Software
Function:
Encryption
Reported In Release:
FOS7.0.2
Service Request ID:
1145987
Defect ID:
DEFECT000446004
Technical Severity:
High