Brocade Fabric OS v7.0.2e Release Notes v1.0

Fabric OS v7.0.2e Release Notes v1.0 Page 51 of 53
Defect ID:
DEFECT000420051
Technical Severity:
Medium
Summary:
On DCX with FC8-48 in slot 3, CRC with good eof errors are seen.
Symptom:
CRC with good EOF onbserved on DCX with FC8-48 in slot 3 on ports 3/42 <-> 8/139
Probability:
Medium
Feature:
FOS Software
Function:
System Performance
Reported In Release:
FOS6.4.3
Service Request ID:
1035482
Defect ID:
DEFECT000421461
Technical Severity:
Medium
Summary:
On DCX-4S, backend CRC errors detected on core blade port 3/56 connecting FC8-32 port blade.
Symptom:
RASLog message C2-5825 "Detect CRC error with good EOF" displayed.
Probability:
Medium
Feature:
FOS Software
Function:
OS: Configuration
Reported In Release:
FOS6.4.2
Service Request ID:
1035401
Defect ID:
DEFECT000422259
Technical Severity:
High
Summary:
Fabric watch daemon (fwd) triggered switch panic.
Symptom:
Switch panic after monitor of a particular frame type is installed to a larger number of ports.
Probability:
Low
Feature:
FABRIC WATCH
Function:
Other
Reported In Release:
FOS7.1.0
Service Request ID:
,1102396
Defect ID:
DEFECT000422455
Technical Severity:
Medium
Summary:
During DWDM link failover, OLS is experienced with LOS_TOV enabled.
Symptom:
A port connected to a third party DWDM goes into ‘no module’ mode during DWDM failover.
Probability:
Medium
Feature:
16G ASIC Driver
Function:
General
Reported In Release:
FOS7.0.1
Defect ID:
DEFECT000422477
Technical Severity:
High
Summary:
HBA on 5460 embedded port does not login correctly after the host is rebooted
Symptom:
Embedded switch port must be disabled/enabled once the host is fully booted to support
successful HBA login.
Probability:
Medium
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS7.0.2
Service Request ID:
1032557
Defect ID:
DEFECT000422523
Technical Severity:
Medium
Summary:
Switch in reboot loop after loading config with SSL certificate file entry and no certificate on the
switch
Symptom:
Loading a configuration with an invalid ssl.certfile entry may cause the switch to reboot
repeatedly.
Workaround:
Delete the csr file in /etc/fabos/certs/sw0 then reboot the switch.
Probability:
Medium
Feature:
FOS Software
Function:
Web Management
Reported In Release:
FOS7.0.2
Service Request ID:
1093229