Brocade Fabric OS MIB Reference v7.1.0 (53-1002750-01, March 2013)

150 Fabric OS MIB Reference
53-1002750-01
Switch Fabric group
6
swNbRemPort
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.4
Read only This is the port index on the other end of the ISL.
The physical port number of the remote switch, plus 1. The valid values
for the Brocade 12000, 24000, and 48000 directors are 1 through the
maximum number of ports +1.
swNbBaudRate
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.5
Read only The baud rate of the ISL. It is always unknown (0).
Possible values are:
• other (1) - None of the following.
• oneEighth (2) - 155 Mbaud.
• quarter (4) - 266 Mbaud.
• half (8) - 532 Mbaud.
• full (16) - 1 Gbaud.
• double (32) - 2 Gbaud.
• quadruple (64) - 4 Gbaud.
• octuple (128) - 8 Gbaud.
• decuple (256) - 10 Gbaud.
• sexdecuple (512) - 16 Gbaud
The valid values for the Brocade 12000, 24000, and 48000 directors
switch are 16 (full) and 32 (double).
The valid value for the Brocade 4100 is 64 (quadruple).
The valid values for the Brocade DCX are double (32), quadruple (64),
and octuple (128).
swNbIslState
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.6
Read only The current state of the ISL. The possible values are as follows.
• 0 - ISL is down.
• 1 - ISL is initiating and not yet operational.
• 2, 3, 4, - Used for notification of internal states.
• 5 - ISL is active.
swNbIslCost
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.7
Read-write The current link cost of the ISL. In other words, the cost of a link to control
the routing algorithm.
swNbRemPortName
1.3.6.1.4.1.1588.2.1.1.1
.2.9.1.8
Read only The WWN of the remote port.
swFabricMemTable
1.3.6.1.4.1.1588.2.1.1.1
.2.10
Not
accessible
This table contains information on the member switches of a fabric.
Supported in Fabric OS v2.6.1 and not v3.2.0.
This is not available in v6.2.0 and later releases.
swIDIDMode
1.3.6.1.4.1.1588.2.1.1.1
.2.11
Read only This identifies the status of Insistent Domain ID (IDID) mode. Status
indicating if IDID mode is enabled or not.
swPmgrEventType
1.3.6.1.4.1.1588.2.1.1.1
.2.12
Not
accessible
This indicates partition manager event type. This OID identifies the
following events:
• create (0)
• delete (1)
• moveport (2)
• fidchange (3)
• basechange (4)
• vfstatechange (5)
swPmgrEventTime
1.3.6.1.4.1.1588.2.1.1.1
.2.13
Not
accessible
This object identifies the date and time when any events mentioned in
swPmgrEventType occur, in textual format.
TABLE 48
Object and OID Access Description