Brocade Fabric OS MIB Reference v7.1.0 (53-1002750-01, March 2013)
Fabric OS MIB Reference 153
53-1002750-01
Fibre Channel port group
6
swFCPortType
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.2
Read only The type of ASIC for the switch port.
Possible values are:
• stitch (1)
• flannel (2)
• loom (3) (Brocade 2000 series)
• bloom (4) (Valid value for Brocade 3250, 3850, 3900, 12000,
24000)
• rdbloom (5)
• wormhole (6)
• other (7) (Valid value for Brocade 200E, 4012, 4100, 4900,
7500, 7600, 48000, 300, 5100 and 5300)
• unknown (8)
swFCPortPhyState
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.3
Read only The physical state of the port.
Possible values are:
• noCard (1) - No card is present in this switch slot.
• noTransceiver (2) - No Transceiver module in this port
(Transceiver is the generic name for GBIC, SFP, and so on).
• laserFault (3) - The module is signaling a laser fault (defective
GBIC).
• noLight (4) - The module is not receiving light.
• noSync (5) - The module is receiving light but is out of sync.
• inSync (6) - The module is receiving light and is in sync.
• portFault (7) - The port is marked faulty (defective GBIC, cable, or
device).
• diagFault (8) - The port failed diagnostics (defective G_Port or
FL_Port card or motherboard).
• lockRef (9) - The port is locking to the reference signal.
• validating (10) - The module is being validated.
• invalidModule (11) - The module is invalid.
• noSigDet (14) - No Signal is detected in the port.
• unknown (255) - The module is unknown.
swFCPortOpStatus
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.4
Read only The operational status of the port.
Possible values are:
• unknown (0) - The port module is physically absent.
• online (1) - User frames can be passed.
• offline (2) - No user frames can be passed.
• testing (3) - No user frames can be passed.
• faulty (4) - The port module is physically faulty.
swFCPortAdmStatus
1.3.6.1.4.1.1588.2.1.1.1.6.2
.1.5
Read-write The desired state of the port. A management station might place the
port in a desired state by setting this object accordingly.
Based on the port status, this OID returns one of the following:
• Online - When queried port is online.
• Offline - When queried port is offline.
• Faulty - When port is in faulty state.
The following values can be used to set this object:
• Online - To change port's state to Online.
• Offline - To change port's state to Offline.
TABLE 50
Object and OID Access Description