Brocade Fabric OS MIB Reference v7.1.0 (53-1002750-01, March 2013)

Fabric OS MIB Reference 173
53-1002750-01
Toptalker group
6
Toptalker group
swTrunkGrpTx
1.3.6.1.4.1.1588.2.1.1.1.24.3.
1.3
Read only Gives the aggregate value of the transmitted words from this trunk
group.
NOTE: The syntax for this MIB variable is an OCTET STRING. The
output is shown in hexadecimal value. The value of
swTrunkGrpTx is the 4-byte word transmitted in the TrunkGrp
port. This value can be obtained through the CLI in the
output of the portStatsShow command (stat_wtx value) for
the corresponding trunk ports.
swTrunkGrpRx
1.3.6.1.4.1.1588.2.1.1.1.24.3.
1.4
Read only Gives the aggregate value of the received words by this trunk group.
NOTE: The syntax for this MIB variable is an OCTET STRING. The
output is shown in hexadecimal value. The value of
swTrunkGrpRx is the 4-byte word received in the TrunkGrp
port. This value can be obtained through the CLI in the
output of the portStatsShow command (stat_wrx value) for
the corresponding trunk ports.
TABLE 58
Object and OID Access Description
TABLE 59
Object and OID Access Description
swTopTalker
1.3.6.1.4.1.1588.2.1.1.1.25
Not
accessible
The OID sub-tree for TopTalker group.
swTopTalkerMntMode
1.3.6.1.4.1.1588.2.1.1.1.25.1
Read only This object gives the mode in which toptalker is installed.
Possible modes:
• Fabricmode (1)
• portmode (2)
swTopTalkerMntNumEntries
1.3.6.1.4.1.1588.2.1.1.1.25.2
Read only This object provides the number of toptalking flows that are existing
in the switch.
swTopTalkerMntTable
1.3.6.1.4.1.1588.2.1.1.1.25.3
Not
accessible
Table to display toptalking flows.
swTopTalkerMntEntry
1.3.6.1.4.1.1588.2.1.1.1.25.3.
1
Not
accessible
Entry for the toptalking flows.
swTopTalkerMntIndex
1.3.6.1.4.1.1588.2.1.1.1.25.3.
1.1
Read only This object identifies the list/object entry. The possible values are
one to maximum number of entries.
swTopTalkerMntPort
1.3.6.1.4.1.1588.2.1.1.1.25.3.
1.2
Read only This object identifies the switch port number on which the F_Port
mode toptalker is added. This attribute is applicable to F_Port mode
only.
swTopTalkerMntSpid
1.3.6.1.4.1.1588.2.1.1.1.25.3.
1.3
Read only This object identifies the SID of the host.
NOTE: SNMP response for this object will be in decimal format. You
must convert the response to hexadecimal format to get the
exact PID.