Brocade Fabric OS MIB Reference v7.1.0 (53-1002750-01, March 2013)
Fabric OS MIB Reference 79
53-1002750-01
fcFeConfig group
4
fcFeModuleFxPortCapacity
1.3.6.1.2.1.75.1.1.4.1.6
Read only The number of Fx_Ports that can be contained within the module.
Within each module, the ports are uniquely numbered in the range
from 1 to fcFeModuleFxPortCapacity, inclusive. However, the
numbers are not required to be contiguous.
Valid values:
• Brocade 300 24 ports
• Brocade 4100 32 ports
• Brocade 4900 64 ports
• Brocade 5000 32 ports
• Brocade 5100 40 ports
• Brocade 5300 80 ports
• Brocade 7500 or 7500E 32 ports
• Brocade 7600 16 ports
• Brocade 7800 Extension Switch 24 ports
• Brocade 8000 32 ports
• Brocade Encryption Switch 32 ports
• Brocade DCX 640 ports
• Brocade DCX-4S 320 ports
• Brocade 48000 384 ports
• Brocade 6505 24 ports
• Brocade 6510 48 ports
• Brocade 6520 96 ports
• Brocade DCX 8510-4 Backbone 320 ports
• Brocade DCX 8510-8 Backbone 640 ports
• Brocade VA-40FC 40 ports
fcFeModuleName
1.3.6.1.2.1.75.1.1.4.1.7
Read-write The Name_Identifier of the module.
This object returns the WWN of the switch.
fcFxPortTable
1.3.6.1.2.1.75.1.1.5
Not accessible A table that contains configuration and service parameters of the
Fx_Ports, one entry for each Fx_Port in the fabric element.
fcFxPortEntry
1.3.6.1.2.1.75.1.1.5.1
Not accessible An entry containing the configuration and service parameters of an
Fx_Port.
fcFxPortIndex
1.3.6.1.2.1.75.1.1.5.1.1
Not accessible Identifies the Fx_Port within the module. This number ranges from 1
to the value of fcFeModulePortCapacity for the associated module.
The value remains constant for the identified Fx_Port until the
module is re-initialized.
fcFxPortName
1.3.6.1.2.1.75.1.1.5.1.2
Read only The World Wide Name of this Fx_Port. Each Fx_Port has a unique
port World Wide Name within the fabric.
This object returns the WWN of the port.
fcFxPortFcphVersionHigh
1.3.6.1.2.1.75.1.1.5.1.3
Read only The highest or most recent version of FC-PH that the Fx_Port is
configured to support. This value is always 32.
fcFxPortFcphVersionLow
1.3.6.1.2.1.75.1.1.5.1.4
Read only The lowest or earliest version of FC-PH that the Fx_Port is configured
to support. This value is always six.
fcFxPortBbCredit
1.3.6.1.2.1.75.1.1.5.1.5
Read only The total number of receive buffers available for holding Class 1
connect-request, and Class 2 or 3 frames from the attached
Nx_Port. It is for buffer-to-buffer flow control in the direction from the
attached Nx_Port (if applicable) to Fx_Port.
TABLE 27
Object and OID Access Description