Brocade Fabric OS Command Reference v7.1.0 (53-1002746-01, March 2013)

1034 Fabric OS Command Reference
53-1002746-01
syslogdIpAdd
2
syslogdIpAdd
Configures a switch to forward system messages to specified servers.
SYNOPSIS syslogdipadd ip_address
DESCRIPTION Use this command to configure a switch to forward all error log entries to the syslog daemon (syslogd) of
one or more specified servers. The syslog daemon is a process available on most UNIX systems that
reads and forwards system messages to the appropriate log files or users, depending on the system
configuration. Up to six servers are supported.
Only one syslogd server can be specified at any given time. To configure more than one server, the
command must be executed for each server.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
ip_address
Specifies the IP address of the server running syslogd in IPv4 or IPv6 format.
EXAMPLES To add an IP address to the list of machines to which system messages are sent:
switch:admin> syslogdipadd 1080::8:800:200C:417A
switch:admin> syslogdipshow
syslog.1 1080::8:800:200C:417A
To add a second IP address to the existing syslogd server configuration:
switch:admin> syslogdipadd 192.168.163.234
switch:admin> syslogdipshow
syslog.1 1080::8:800:200C:417A
syslog.2 192.168.163.234
SEE ALSO errShow, syslogdFacility, syslogdIpRemove, syslogdIpShow