HP B-series Network Advisor Enterprise, Professional Plus, and Professional 11.1.5 Release Notes (5697-2464, January 2013)

3. Enter # Management_Application/cimom/bin/slptool findsrvs
service:service-agent and press Enter to verify the SLP service is running as a Service
Agent (SA).
4. Enter # < Management_Application >/cimom/bin/slptool findsrvs
service:wbem and press Enter to verify the SLP service is advertising its WBEM services.
5. Select one of the following options to verify the SLP service is advertising the WBEM SLP
template over its configured client protocol adapters.
• Enter # Management_Application/cimom /bin/slptool findattrs
service:wbem:http://IP_Address:Port and press Enter.
• Enter # Management_Application/cimom /bin/slptool findattrs
service:wbem:https://IP_Address:Port and press Enter.
NOTE: IP_Address:Port is the IP address and port number that display when you
use the slptool findsrvs service:wbem command.
SLP on Windows systems
This section describes how to verify the SLP daemon on Windows systems. The following are SLP
file locations:
• SLP log—Management_Application\cimom \cfg\slp.log
• SLP daemon—Management_Application\cimom\cfg\slp.conf (the SLP daemon can
be reconfigure the by modifying this file).
• SLP register—Management_Application\cimom\cfg\slp.reg
Statically register an application that does not dynamically register with SLP using SLPAPIs by
modifying this file. For more information about these files, read the comments contained in
them, or see http://www.openslp.org/doc/html/UsersGuide/index.html.
Verifying SLP service installation and operation on Windows systems:
1. Launch the Server Management Console from the Start menu
2. Click Start to start the SLP service.
3. Open a command window.
4. Enter cd c:\Management_Application\cimom \bin and press Enter to change to
the directory where slpd.bat is located.
5. Enter > slptool findsrvs service:service-agent and press Enter to verify the
SLP service is running as a Service Agent.
6. Enter > slptool findsrvs service:wbem and press Enter to verify the SLP service
is advertising its WBEM services.
7. Select one of the following options to verify the SLP service is advertising the WBEM SLP
template over its configured client protocol adapters.
• Enter > slptool findattrs service:wbem:http://IP_Address:Port and
press Enter.
• Enter > slptool findattrs service:wbem:https://IP_Address:Port and
press Enter.
NOTE: IP_Address:Port is the IP address and port number that display when you
use the slptool findsrvs service:wbem command.
Migration and upgrades 17