HP B-series Network Advisor Enterprise, Professional Plus, and Professional 11.1.5 Release Notes (5697-2464, January 2013)

Table 7 HP Network Advisor 11.1.0 closed defects (continued)
SolutionClosed fixes summary
Fixed in HP Network Advisor 11.1.0.Newer master log events are deleted when the master log reaches the
maximum limit (5000).
Fixed in HP Network Advisor 11.1.0.DCFM patch upgrades is not applied if services are running; there are no
warning messages to alert the user.
Fixed in HP Network Advisor 11.1.0.DCFM stops sending email notifications via users until they restart services.
Fixed in HP Network Advisor 11.1.0.Ports fenced due to a violation are not shown in the Port fencing dialog.
Fixed in HP Network Advisor 11.1.0.Duplicate Encryption requests are sent to the encrypted LUNs causing data
corruption.
Fixed in HP Network Advisor 11.1.0.Users are unable to manage 16 Gb directors using DCFM.
Workaround prior to upgrade: Use CLI or
WebTools to manage the zones.
QuickLoop Fabric Assist zones are not readable by DCFM.
Fixed in HP Network Advisor 11.1.0.
Workaround prior to upgrade: Go into
DCFM options and set up the FICON
display mode again.
DCFM FICON display setup periodically disappears.
Fixed in HP Network Advisor 11.1.0.
Fixed in HP Network Advisor 11.1.0.When client and server are in different time zones, supportsave scheduler
does not function as expected.
Fixed in HP Network Advisor 11.1.0.There is a Java SE for Business Denial of Service Vulnerability.
Fixed in HP Network Advisor 11.1.0.Customers get the wrong property value for Brocade_Product.Vendor
property.
Fixed in HP Network Advisor 11.1.0.Firmware Management message states that "Coordinated Hot Code Load"
is not supported on switches.
Fixed in HP Network Advisor 11.1.0.In Rekey Sessions dialog, same re-key session number is displayed for all
LUNs in a container.
Fixed in HP Network Advisor 11.1.0.Real-Time and Historical graph on FCIP tunnels with multiple HP
StorageWorks B-series Multiprotocol Router Blades does not work.
HP Network Advisor 11.1.1 fixes
Table 8 (page 20) lists the closed defects for this release.
Table 8 HP Network Advisor 11.1.1 closed defects
SolutionClosed fixes summary
Workaround prior to upgrade: Close the
dialog and reopen it to enable the ASM
bit.
ASM is not set when activating the Active Configuration with Active=Save
option enabled in the Active Matrix confirmation dialog.
Fixed in HP Network Advisor 11.1.1.
Fixed in HP Network Advisor 11.1.1In a FICON environment, the configure cascaded operation fails while
setting HIF and does not display a reason for the failure.
Fixed in HP Network Advisor 11.1.1The ModifyRole( ) method for DCB devices fails to modify the complete rule
of an ACL policy for an SMI Agent.
Fixed in HP Network Advisor 11.1.1CreateACL/DeleteACL/ModifyACL methods are deployed successfully to
VF enabled DCB devices, but the SMI agent returns a "Not Supported"
error code
20