Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
7-12
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 7 Using Cisco Fabric Services
CFS Regions
• Removing a Feature from a Region, page 7-14
Creating CFS Regions
To create a CFS region using Fabric Manager, perform this task:
Step 1 In the Physical Attributes pane, expand Switches and then choose CFS.
The information pane displays the Global, IP Multicast, Feature by Region, and All Regions tabs.
Step 2 Click the All Regions tab.
The tab displays a list of Switches and RegionIds.
Step 3 Click the Create Row button on the toolbar.
Figure 7-5 shows the Create a Region dialog box.
Figure 7-5 Create a Region Dialog Box
Step 4
Choose the switch from the drop-down list and choose a RegionId from the range.
Step 5 Click Create.
Upon successful creation of the region, Success is displayed at the bottom of the dialog box.
Assigning Features to CFS Regions
To assign a feature to a region using Fabric Manager, perform this task:
Step 1 In the Physical Attributes pane, expand Switches and then choose CFS.
The information pane displays the Global, IP Multicast, Feature by Region, and All Regions tabs.
Step 2 Click the Feature by Region tab.
This tab lists all the switches along with their corresponding Feature and RegionId.
Step 3 Click the Create Row button on the toolbar.
Figure 7-6 shows the Assign a Feature dialog box.