Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
7-14
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 7 Using Cisco Fabric Services
CFS Regions
Figure 7-7 Feature by Region Tab
Step 3
Double-click the RegionId cell in the required row.
The cursor blinks in the cell prompting a change in the value.
Step 4 Change the RegionId value to the required region.
Step 5 Click the Apply Changes button on the tool bar to commit the change.
Removing a Feature from a Region
To remove a feature from a region using Fabric Manager, perform this task:
Step 1 Click the Feature by Region tab and click the required row.
Step 2 Click the Delete Row button on the toolbar.
Figure 7-8 shows a confirmation dialog box.
Figure 7-8 Removing a Feature from a Region
Step 3
Click Yes to confirm row deletion from the table in view.
Deleting CFS Regions
To delete an entire region, perform this task:
Step 1 Click the All Regions tab and click the required row.
Step 2 Click Delete Row.
This action removes all entries pertaining to that switch and region in the table under Feature by Region
tab.