Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
7-15
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 7 Using Cisco Fabric Services
Displaying CFS Distribution Information
Figure 7-9 shows a confirmation dialog box.
Figure 7-9 Deleting CFS Regions
Step 3
Click Yes to confirm deletion of the region.
Note CFS cannot distribute over both IPv4 and IPv6 from the same switch.
Displaying CFS Distribution Information
To display the status of CFS distribution on the switch using Device Manager, perform this task:
Step 1 Choose Admin > CFS (Cisco Fabric Services).
You see the CFS dialog box. This dialog box displays the distribution status of each feature using CFS,
which currently registered applications are using CFS, and the result of the last successful merge
attempt.
Step 2 Select a row and click Details to view more information about the feature.
CFS Example Using Fabric Manager
This procedure is an example of what you see when you use Fabric Manager to configure a feature that
uses CFS:
Step 1 Select the CFS-capable feature that you want to configure.
For example, expand a VSAN and then choose Port Security in the Logical Domains pane.
You see the port security configuration for that VSAN in the Information pane.
Step 2 Click the CFS tab.
You see the CFS configuration and status for each switch (see Figure 7-10).