Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
7-19
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 7 Using Cisco Fabric Services
Default Settings
Note When using CFS with features like device alias, you must choose commit at the end of each
configuration. If the session is locked, you must exit the feature by selecting abort.
Default Settings
Table 7-1 lists the default settings for CFS configurations.
Table 7-1 Default CFS Parameters
Parameters Default
CFS distribution on the switch Enabled.
Database changes Implicitly enabled with the first configuration change.
Application distribution Differs based on application.
Commit Explicit configuration is required.
CFS over IP Disabled.
IPv4 multicast address 239.255.70.83.
IPv6 multicast address ff15::efff:4653.