Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
8-2
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 8 Configuring Ethernet Interfaces
Displaying Interface Information
Figure 8-1 Ethernet Information Pane
Step 2
Select the VLAN tab to display the VLAN assigned to each interface.
Step 3 Select the CDP Neighbors tab to display the CDP neighbor assigned to each interface.
Default Physical Ethernet Settings
The following table lists the default settings for all physical Ethernet interfaces:
Parameter Default Setting
Debounce Enable, 100 milliseconds
Duplex Auto (full-duplex)
Encapsulation ARPA
MTU
1
1. MTU cannot be changed per-physical Ethernet interface. You modify MTU by selecting maps of QoS classes.
1500 bytes
Port Mode Access
Speed Auto (10000)