Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
9-5
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 9 Configuring Virtual Interfaces
Configuring Virtual Interfaces
You see the Virtual Interface Groups in the information pane as shown in Figure 9-1.
Step 2 Select the Virtual Interface Group to be deleted.
Step 3 Click the Delete Row icon.
You see a dialog box asking you to confirm the deletion.
Step 4 Click Yes to confirm the deletion.
Step 5 Click the Apply icon to apply the change.
.
Using the Virtual Interface Wizard
Step 1 Click the Virtual Interface button on the tool bar.
You see the Virtual Interface wizard dialog box as shown in Figure 9-4.
Figure 9-4 Virtual Interface Wizard
Step 2
Follow the directions in the Virtual Interface Wizard. Select the switch where the virtual interface will
be created, and the virtual interface group to contain the virtual interface, and specify the virtual
interface type (Ethernet or Fibre Channel). The wizard sets the virtual interface ID to 1.
Step 3 Click Finish to commit and distribute the change.