Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
9-6
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 9 Configuring Virtual Interfaces
Configuring Virtual Interfaces
Creating a Virtual Ethernet Interface
To create a virtual Ethernet interface, perform this task:
Step 1 In the Physical Attributes pane, expand Switches, expand Interfaces, expand Ethernet, expand FCoE,
expand Virtual Interfaces, and then choose Ethernet.
You see the Virtual Ethernet information pane as shown in Figure 9-5.
Figure 9-5 Virtual Ethernet
Step 2
In the Information pane toolbar, click the Create Row icon.
You see the Virtual Ethernet dialog box as shown in Figure 9-6.
Figure 9-6 Create Virtual Ethernet
Step 3
Select a switch in the Switch pull-down menu.
Step 4 Enter the virtual interface group ID in the VIG ID field. The virtual interface ID is set to 1.
Step 5 Click Create.