Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
9-7
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 9 Configuring Virtual Interfaces
Configuring Virtual Interfaces
Step 6 Click the Apply icon to apply the change.
Deleting a Virtual Ethernet Interface
To delete a virtual Ethernet interface, perform this task:
Step 1 In the Physical Attributes pane, expand Switches > Interfaces > Ethernet > FCoE, and then choose
Virtual Ethernet Interfaces.
You see the Virtual Ethernet information pane as shown in Figure 9-5.
Step 2 Select a virtual Ethernet row from the information pane.
Step 3 In the Information pane toolbar, click the Delete Row icon.
Step 4 Confirm the deletion in the dialog box.
Creating a Virtual Fibre Channel Interface
To create a virtual Fibre Channel interface, perform this task:
Step 1 In the Physical Attributes pane, expand Switches > Interfaces > Ethernet > FCoE, and then choose
Virtual FC Interfaces.
Step 2 In the Information pane toolbar, click the Create Row icon.
You see the Virtual Ethernet dialog box as shown in Figure 9-7.
Figure 9-7 Create Virtual Fibre Channel
Step 3
Select a switch in the Switch pull-down menu.
Step 4 Enter the Virtual Interface Group ID in the VIG ID field. The interface ID is set to a value of 1.
Step 5 Click Create.