Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
10-14
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 10 Configuring Fibre Channel Interfaces
Default Settings
Step 6 Click Close when you are finished gathering and displaying statistics.
Default Settings
Table 10-6 lists the default settings for native Fibre Channel interface parameters.
Table 10-6 lists the default settings for virtual Fibre Channel interface parameters.
Table 10-5 Default Fibre Channel Interface Parameters
Parameters Default
Interface mode Auto
Interface speed Auto
Administrative state Shutdown (unless changed during initial setup)
Trunk mode On (unless changed during initial setup)
Trunk-allowed VSANs 1 to 4093
Interface VSAN Default VSAN (1)
Beacon mode Off (disabled)
EISL encapsulation Disabled
Data field size 2112 bytes
Table 10-6 Default Virtual Fibre Channel Interface Parameters
Parameters Default
Interface mode Auto
Interface speed n/a
Administrative state Shutdown (unless changed during initial setup)
Trunk mode n/a
Trunk-allowed VSANs n/a
Interface VSAN Default VSAN (1)
EISL encapsulation n/a
Data field size n/a