Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
11-2
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 11 Configuring Domain Parameters
Information About Fibre Channel Domains
Figure 11-1 Sample fcdomain Configuration
Note Domain IDs and VSAN values used in all procedures are only provided as examples. Be sure to use IDs
and values that apply to your configuration.
This section describes the fcdomain feature and includes the following topics:
• About Domain Restart, page 11-3
• Restarting a Domain, page 11-3
• About Switch Priority, page 11-4
• Configuring Switch Priority, page 11-4
• About fcdomain Initiation, page 11-5
• Enabling or Disabling fcdomains, page 11-5
• Setting Fabric Names, page 11-6
• About Incoming RCFs, page 11-6
• Rejecting Incoming RCFs, page 11-6
• About Autoreconfiguring Merged Fabrics, page 11-7
• Enabling Autoreconfiguration, page 11-7
Local WWN
20:02:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 7
Configured priority = 128
Runtime priority = 128
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
Local WWN
20:01:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 2
Configured priority = 128
Runtime priority = 2
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
Local WWN
20:03:ab:ba:cd:dc:f4:00
Configured domain ID
0 (zero) preferred
Runtime domain ID = 102
Configured priority = 128
Runtime priority = 128
Runtime fabric name
20:01:ab:ba:cd:cd:dc:f4
7.0.1
7.0.2
7.0.0
99.0.1
99.0.2
99.0.3
99.1.2
99.1.1
79953
Switch 7 (subordinate)
Switch 99 (subordinate)
Switch 2 (principal)