Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
14-5
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 14 Configuring SAN Port Channels
Configuring SAN Port Channels
Configuring SAN Port Channels
SAN port channels are created with default values. You can change the default configuration just as any
other physical interface.
Figure 14-5 provides examples of valid SAN port channel configurations.
Figure 14-5 Valid SAN Port Channel Configurations
Figure 14-6 shows examples of invalid configurations. Assuming that the links are brought up in the 1,
2, 3, 4 sequence, links 3 and 4 will be operationally down as the fabric is misconfigured.
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
Switch A Switch B Switch A Switch B
Channel Group 10 Channel Group 20 Channel Group 10 Channel Group 20
Channel Group 1 Channel Group 2
187235