Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
14-19
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 14 Configuring SAN Port Channels
Verifying SAN Port Channel Configuration
Verifying SAN Port Channel Configuration
You can use the Information pane in Fabric Manager to verify your port channel configuration (see
Figure 14-16).
Figure 14-16 Port Channel Summary in Fabric Manager
Default Settings
Table 14-3 lists the default settings for SAN port channels.
Table 14-3 Default SAN Port Channel Parameters
Parameters Default
Port channels FSPF is enabled by default.
Create port channel Administratively up.
Default port channel mode On.
Autocreation Disabled.