Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
15-7
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 15 Configuring and Managing VSANs
Configuring VSANs
Figure 15-5 Create VSAN Dialog Box
Note If you check the Static Domain IDs check box, Fabric Manager creates the VSAN in suspended
mode and then automatically activates the VSAN.
Step 2 Check the switches that you want in this VSAN.
Step 3 Fill in the VSAN Name and VSAN ID fields.
Step 4 Set the LoadBalancing value and the InterOperValue.
Step 5 Set the Admin State to active or suspended.
Step 6 Check the Static Domain Ids check box to assign an unused static domain ID to the VSAN.
Step 7 (Optional) Check the Enable Fabric Binding for Selected Switches options if you want this feature
enabled.
See Chapter 25, “Configuring Fabric Binding” for details.
Step 8 Complete the fields in this dialog box and click Create to add the VSAN or click Close.