Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
16-9
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 16 Configuring and Managing Zones
Configuring Zones
Figure 16-6 Edit Local Full Zone Database Dialog Box
If you want to view zone membership information, right-click in the All Zone Membership(s) column,
and then choose Show Details for the current row or all rows from the pop-up menu.
Step 3 Click Zones in the left pane and click the Insert icon to create a zone.
You see the Create Zone dialog box as shown in Figure 16-7.
Figure 16-7 Create Zone Dialog Box
Step 4
Enter a zone name.
Step 5 Check one of the following check boxes:
a. Read Only—The zone permits read and denies write.
b. Permit QoS traffic with Priority—You set the priority from the drop-down list.
c. Restrict Broadcast frames to Zone Members
Step 6 Click OK to create the zone.
If you want to move this zone into an existing zone set, skip to Step 8.
Step 7 Click Zoneset in the left pane and click the Insert icon to create a zone set.
You see the Zoneset Name dialog box as shown in Figure 16-8.