Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
16-10
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 16 Configuring and Managing Zones
Configuring Zones
Figure 16-8 Zoneset Name Dialog Box
Step 8
Enter a zone set name and click OK.
Note One of these symbols ($, -, ^, _) or all alphanumeric characters are supported. In interop mode
2 and 3, this symbol (_) or all alphanumeric characters are supported.
Step 9 Choose the zone set where you want to add a zone and click the Insert icon, or you can drag and drop
Zone3 over Zoneset1.
You see the Select Zone dialog box as shown in Figure 16-9.
Figure 16-9 Select Zone Dialog Box
Step 10 Click Add to add the zone.
Adding Zone Members
After you create a zone, you can add members to the zone. You can add members using multiple port
identification types.
To add a member to a zone using Fabric Manager, perform this task:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2 Choose a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box (see Figure 16-10) for the selected VSAN.