Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
16-14
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 16 Configuring and Managing Zones
Zone Sets
Step 2 Choose a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Click Activate to activate the zone set.
You see the preactivation check dialog box as shown in Figure 16-14.
Figure 16-14 Pre-Activation Check Dialog Box
Step 4
Click Yes to review the differences.
You see the Local vs. Active Differences dialog box as shown in Figure 16-15.
Figure 16-15 Local vs. Active Differences Dialog Box
Step 5
Click Close to close the dialog box.
You see the Save Configuration dialog box as shown in Figure 16-16.
Figure 16-16 Save Configuration Dialog Box
Step 6
Check the Save Running to Startup Configuration check box to save all changes to the startup
configuration.
Step 7 Click Continue Activation to activate the zone set, or click Cancel to close the dialog box and discard
any unsaved changes.