Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
16-15
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 16 Configuring and Managing Zones
Zone Sets
You see the Zone Log dialog box, which shows if the zone set activation was successful (see
Figure 16-17).
Figure 16-17 Zone Log Dialog Box
To deactivate an existing zone set, perform this task:
Step 1 Right-click the zone set you want to deactivate, and then choose Deactivate from the pop-up menu.
Step 2 Click OK in the confirmation dialog box to deactivate the zone set.
Displaying Zone Membership Information
To display zone membership information for members assigned to zones in Fabric Manager, perform this
task:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2 Choose a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Click Zones in the left pane. The right pane lists the members for each zone.