Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
16-26
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 16 Configuring and Managing Zones
Zone Set Duplication
You see the Select VSAN dialog box.
Step 2 Choose a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Choose File > Backup to back up the existing zone configuration to a workstation using TFTP, or choose
File > Restore to restore a saved zone configuration.
You see the Restore Zone Configuration dialog box as shown in Figure 16-27.
Figure 16-27 Restore Zone Configuration Dialog Box
You can edit this configuration before restoring it to the switch.
Step 4 Click Continue Restore, or click Close to close the dialog box without restoring.
Renaming Zones, Zone Sets, and Aliases
To rename a zone, zone set, or alias using Fabric Manager, perform this task:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2 Choose a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN as shown in Figure 16-28.