Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
16-27
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 16 Configuring and Managing Zones
Zone Set Duplication
Figure 16-28 Edit Local Full Zone Database Dialog Box
Step 3 Click a zone or zone set in the left pane.
Step 4 Choose Edit > Rename.
An edit box appears around the zone or zone set name.
Step 5 Enter a new name.
Step 6 Click Activate or Distribute.
Cloning Zones, Zone Sets, FC Aliases, and Zone Attribute Groups
To clone a zone, zone set, fcalias, or zone-attribute-group, perform this task:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2 Choose a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Choose Edit > Clone.
You see the Clone Zoneset dialog box as shown in Figure 16-29. The default name is the word Clone
followed by the original name.