Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
16-28
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 16 Configuring and Managing Zones
Verifying Zone Information
Figure 16-29 Clone Zoneset Dialog Box
Step 4 Change the name for the cloned entry.
Step 5 Click OK to save the new clone.
The cloned database now appears along with the original database.
Migrating a Non-MDS Database
To use the Zone Migration Wizard to migrate a non-MDS database using Fabric Manager, perform this
task:
Step 1 Choose Zone > Migrate Non-MDS Database.
You see the Zone Migration Wizard.
Step 2 Follow the prompts in the wizard to migrate the database.
Clearing the Zone Server Database
You can clear all configured information in the zone server database for the specified VSAN.
To clear the zone server database, see the Cisco Nexus 5000 Series CLI Configuration Guide.
Note Clearing a zone set only erases the full zone database, not the active zone database.
Note After clearing the zone server database, you must explicitly copy the running configuration to the startup
configuration to save the configuration.
Verifying Zone Information
To view zone information and statistics using Fabric Manager, perform this task:
Step 1 Expand a VSAN and click a zone set in the Logical Domains pane.
You see the zone configuration in the Information pane.