Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
21-2
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 21 Discovering SCSI Targets
Information About SCSI LUN Discovery
Starting SCSI LUN Discovery
To begin SCSI LUN discovery using Device Manager, perform this task:
Step 1 Choose FC > Advanced > LUNs.
You see the LUN Configuration dialog box as shown in Figure 21-1.
Figure 21-1 LUN Configuration Dialog Box
Step 2 Set StartDiscovery to local, remote or both.
Step 3 Choose the DiscoveryType and OS.
Step 4 Click Apply to begin discovery.
About Initiating Customized Discovery
Customized discovery consists of a list of VSAN and domain pairs that are selectively configured to
initiate a discovery. The domain ID is a number from 0 to 255 in decimal or a number from 0x0 to 0xFF
in hex.
Initiating Customized Discovery
To initiate a customized discovery using Device Manager, perform this task:
Step 1 Click the VSAN drop-down menu and choose the VSAN in which you want to initiate a customized
discovery.
Step 2 Choose FC > Advanced > LUNs.
You see the LUN Configuration dialog box.
Step 3 Set StartDiscovery to local, remote or both.
Step 4 Fill in the DiscoveryType and OS fields.