Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
22-2
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 22 Advanced Features and Concepts
Fibre Channel Timeout Values
Timer Configuration Across All VSANs
You can modify Fibre Channel protocol related timer values for the switch.
Caution The D_S_TOV, E_D_TOV, and R_A_ TOV values cannot be globally changed unless all VSANs in the
switch are suspended.
Note If a VSAN is not specified when you change the timer value, the changed value is applied to all VSANs
in the switch.
To configure timers in Fabric Manager, perform this task:
Step 1 Expand Switches > FC Services, and then choose Timers & Policies in the Physical Attributes pane.
You see the timers for multiple switches in the Information pane.
Step 2 Click the Change Timeouts button to configure the timeout values.
You see the dialog box as shown in Figure 22-1.
Figure 22-1 Configure Timers in Fabric Manager
To configure timers in Device Manager, perform this task:
Step 1 Choose FC > Advanced > Timers/Policies.
You see the timers for a single switch in the dialog box as shown in Figure 22-2.