Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
22-3
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 22 Advanced Features and Concepts
Fibre Channel Timeout Values
Figure 22-2 Configure Timers in Device Manager
Timer Configuration Per-VSAN
You can also issue the fctimer for a specified VSAN to configure different TOV values for VSANs with
special links such as Fibre Channel. You can configure different E_D_TOV, R_A_TOV, and D_S_TOV
values for individual VSANs. Active VSANs are suspended and activated when their timer values are
changed.
Note This configuration must be propagated to all switches in the fabric. Be sure to configure the same value
in all switches in the fabric.
To configure per-VSAN Fiber Channel timers using Device Manager, perform this task:
Step 1 Choose FC > Advanced > VSAN Timers.
You see the VSANs Timer dialog box as shown in Figure 22-3.
Figure 22-3 VSAN Timers in Device Manager
Step 2
Fill in the timer values that you want to configure.