Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
24-6
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 24 Configuring Port Security
Port Security Activation
Figure 24-2 Port Security CFS
Step 3
Enable CFS on all participating switches in the VSAN by clicking each entry in the Global column and
selecting enable.
Step 4 Click Apply Changes to enable CFS distribution for the port security feature.
Step 5 Click the Control tab.
You see the port security enable state for all switches in the selected VSAN as shown in Figure 24-3.
Figure 24-3 Port Security Configuration
Step 6
In the Status column, choose enable for each switch in the VSAN.
Step 7 Click the CFS tab and in the Command column choose commit on all participating switches in the
VSAN.
Step 8 Click Apply Changes to distribute the enabled port security to all switches in the VSAN.
Port Security Activation
This section includes the following topics:
• Activating Port Security, page 24-7
• Database Activation Rejection, page 24-7
• Forcing Port Security Activation, page 24-8
• Database Reactivation, page 24-8
• Copying an Active Database to the Config Database, page 24-9
• Displaying Activated Port Security Settings, page 24-9