Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
24-13
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 24 Configuring Port Security
Port Security Manual Configuration
Port Security Manual Configuration
To configure port security on a Nexus 5000 Series switch, perform this task:
Step 1 Identify the WWN of the ports that need to be secured.
See the “Adding Authorized Port Pairs” section on page 24-14.
Step 2 Secure the fWWN to an authorized nWWN or pWWN.
Step 3 Activate the port security database.
Step 4 Verify your configuration.
This section includes the following topics:
• WWN Identification Guidelines, page 24-14
• Adding Authorized Port Pairs, page 24-14
• Deleting Port Security Setting, page 24-15
P1, N1, F3 Permitted 5 Wildcard match for F3.
P1, N4, F5 Denied 2 P1 is bound to F1.
P5, N1, F5 Denied 2 N1 is only allowed on F2.
P3, N3, F4 Permitted 1 No conflict.
S1, F10 Permitted 1 No conflict.
S2, F11 Denied 7 P10 is bound to F11.
P4, N4, F5 (auto-learning on) Permitted 3 No conflict.
P4, N4, F5 (auto-learning off) Denied 4 No match.
S3, F5 (auto-learning on) Permitted 3 No conflict.
S3, F5 (auto-learning off) Denied 4 No match.
P1, N1, F6 (auto-learning on) Denied 2 P1 is bound to F1.
P5, N5, F1 (auto-learning on) Denied 7 Only P1 and P2 bound to F1.
S3, F4 (auto-learning on) Denied 7 P3 paired with F4.
S1, F3 (auto-learning on) Permitted 5 No conflict.
P5, N3, F3 Permitted 6 Wildcard ( * ) match for F3
and N3.
P7, N3, F9 Permitted 6 Wildcard ( * ) match for N3.
Table 24-2 Authorization Results for Scenario (continued)
Device Connection Request Authorization Condition Reason