Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
24-15
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 24 Configuring Port Security
Port Security Configuration Distribution
Figure 24-5 Create Port Security Dialog Box
Step 4
Double-click the device from the available list for which you want to create the port security setting.
Step 5 Double-click the port from the available list to which you want to bind the device.
Step 6 Click Create to create the port security setting.
Step 7 Click the Apply Changes icon to save these changes.
Deleting Port Security Setting
To delete a port security setting from the configured database on a switch, perform this task:
Step 1 Expand a VSAN and then choose Port Security in the Logical Domains pane.
Step 2 Click the Config Database tab.
You see the configured port security settings for that VSAN.
Step 3 Click in the row you want to delete.
Step 4 Choose Delete Row.
You see the confirmation dialog box.
Step 5 Click Yes to delete the row, or click No to close the confirmation dialog box without deleting the row.
Step 6 Click the Apply Changes icon to save these changes.
Port Security Configuration Distribution
The port security feature uses the Cisco Fabric Services (CFS) infrastructure to enable efficient database
management, provide a single point of configuration for the entire fabric in the VSAN, and enforce the
port security policies throughout the fabric (see Chapter 7, “Using Cisco Fabric Services”).