Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
24-21
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 24 Configuring Port Security
Default Settings
Step 3 Choose the appropriate configuration database and click the Delete Row button.
Step 4 Click Yes if you want to delete the configuration database.
Clearing the Port Security Database
To clear all existing statistics from the port security database for a specified VSAN using Fabric
Manager, perform this task:
Step 1 Expand a Fabric, expand a VSAN, and then choose Port Security in the Logical Domains pane.
You see the Port Security information in the Information pane (see Figure 24-4).
Step 2 Click the Statistics tab.
You see all the configuration databases.
Step 3 Choose the appropriate configuration database and check the Clear option.
Step 4 Click the Apply Changes icon to save your changes.
To clear any learned entries in the active database for a specified interface within a VSAN using Fabric
Manager, perform this task:
Step 1 Expand a Fabric, expand a VSAN, and then choose Port Security in the Logical Domains pane.
You see the Port Security information in the Information pane.
Step 2 Click the Actions tab.
You see all the configuration databases.
Step 3 Choose the appropriate configuration database and check the AutoLearn option.
Step 4 Click the Apply Changes icon to save your changes.
Note You can clear the Statistics and the AutoLearn option only for switches that are local and do not acquire
locks. Also, learned entries are only local to the switch and do not participate in distribution.
Default Settings
Table 24-4 lists the default settings for all port security features in any switch.
Table 24-4 Default Security Settings
Parameters Default
Auto-learn Enabled if port security is enabled.