Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
25-7
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 25 Configuring Fabric Binding
Configuring Fabric Binding
Step 4 Click the Apply Changes icon to save your changes.
Creating a Fabric Binding Configuration
To create a fabric binding configuration using Fabric Manager, perform this task:
Step 1 Expand a VSAN with fabric binding in the Logical Domains pane. Expand Fabric Binding.
Step 2 Click the Config Database tab in the Information pane.
You see the information as shown in Figure 25-4.
Figure 25-4 Fabric Binding Database Configuration
Step 3
Click Insert Row.
You see the Create Config Database dialog box (see Figure 25-2).
Step 4 Select switches, choose an index, and indicate the peer WWN and the Domain ID.
Step 5 Click Create to create the fabric binding database configuration.
When you save the fabric binding configuration, the config database and the active database are both
saved to the startup configuration and are available after a reboot.
Deleting a Fabric Binding Configuration
To delete a fabric binding configuration using Fabric Manager, perform this task:
Step 1 Expand a VSAN with fabric binding in the Logical Domains pane. Expand Fabric Binding.
Step 2 Click the Config Database tab in the Information pane.
You see the information shown in Figure 25-4.
Step 3 Click in the row for the VSAN for which you want to delete the fabric binding configuration.
Step 4 Click Delete Row to delete the fabric binding configuration.