Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
25-9
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 25 Configuring Fabric Binding
Configuring Fabric Binding
Figure 25-5 Fabric Binding Active Database
Saving Fabric Binding Configurations
When you save the fabric binding configuration, the config database and the active database are both
saved to the startup configuration and are available after a reboot.
To save the fabric binding configuration using Fabric Manager, perform this task:
Step 1 Expand a VSAN with fabric binding in the Logical Domains pane. Expand Fabric Binding.
Step 2 Click the Actions tab (see Figure 25-3).
Step 3 Check the Copy Active to Config check box to copy the active database to the config database.
If the configured database is empty, this action is not successful.
Step 4 Click the Database Differences tab to compare the database with the Config or Active database to view
the differences between the active database and the config database.
Clearing the Fabric Binding Statistics
To clear all existing statistics from the fabric binding database for a specified VSAN using Fabric
Manager, perform this task:
Step 1 Expand a VSAN with fabric binding in the Logical Domains pane. Expand Fabric Binding.
Step 2 Click the Statistics tab in the Information pane.
You see the statistics in the Information pane.
Step 3 Check the Clear check box.
Step 4 Click the Apply Changes icon to save your changes.