Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
26-4
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 26 Configuring Fabric Configuration Servers
Creating an FCS Platform
Figure 26-3 FCS Interconnect Elements Tab
Step 3
Click Close to close the dialog box.
Creating an FCS Platform
To create an FCS platform using Device Manager, perform this task:
Step 1 Choose FC > Advanced > Fabric Config Server.
You see the Fabric Config Server dialog box.
Step 2 Click the Platforms (Enclosures) tab.
Step 3 Click Create.
You see the Create Fabric Config Server dialog box as shown in Figure 26-4.