Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
26-5
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 26 Configuring Fabric Configuration Servers
Displaying FCS Fabric Ports
Figure 26-4 Create Fabric Config Server Dialog Box
Step 4 Enter the VSAN ID, or choose the ID from the drop-down list of available VSAN IDs.
Step 5 Enter the Fabric Configuration Server name in the Name field.
Step 6 Choose the type of server (Gateway, Host, Storage).
Step 7 Enter the WWNs for the server.
Step 8 Enter the management addresses for the server.
Step 9 Click Create to create the server.
Displaying FCS Fabric Ports
To display FCS discovery information using Device Manager, perform this task:
Step 1 Choose FC > Advanced > Fabric Config Server.
You see the Fabric Config Server dialog box.
Step 2 Click the Fabric Ports tab.
You see a list of fabric ports as shown in Figure 26-5.