Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
29-5
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 29 Performance Manager
Flow Statistics Configuration
Figure 29-2 Flow Statistics in Fabric Manager
Step 2 Click the Create icon to create a flow.
Note If you are managing your fabrics with Performance Manager, you need to set up an initial set of
flows and collections on the fabric.
Note When creating flows, make sure the device type is set correctly.
You see the Define Traffic Flows dialog box as shown in Figure 29-3.
Figure 29-3 Define Traffic Flows Dialog Box
Step 3
Choose the VSAN from which to create flows. Flows are defined per active zone set.
Step 4 Click the Type radio button for the flow type you want to define.
Step 5 (Optional) Check the Clear old flows on modified switches check box if you want to remove old flow
data.
Step 6 (Optional) Check the Create flows on all cards check box if you want to create flows on all cards for
flexibility.
Step 7 Click Next to review the available flows for the chosen VSAN.