Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
Index
IN-8
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
discovering targets 21-1
displaying information 21-3
starting discoveries 21-1
SD port mode
description
10-4
interface modes 10-4
secondary MAC addresses
configuring
22-5
small computer system interface. See SCSI
soft zoning
description
16-21
See also zoning
source IDs
exchange based
14-3
flow based 14-3
in-order delivery 18-12
path selection 15-11
SPAN destination port mode. See SD port mode
static routes
runtime checks
18-11
storage devices
access control
16-1
switch priorities
configuring
11-4
default 11-4
sWWNs
configuring for fabric binding
25-4
T
TE port mode
classes of service
10-4
description 10-4
TE ports
fabric binding checking
25-2
FCS support 26-1, 26-2
FSPF topologies 18-1
interoperability 22-9
recovering from link isolations 16-23
trunking restrictions 13-1
timeout values. See TOVs
TOVs
configuring for a VSAN
22-3
default settings 22-12
interoperability 22-8
ranges 22-1
tracked ports
binding operationally
27-3
traffic isolation
VSANs
15-4
trunk-allowed VSAN lists
description
13-4 to 13-5
trunking
comparison with port channels
14-2
configuration guidelines 13-1
description 13-1
displaying information 13-6
interoperability 22-8
link state 13-3
merging traffic 13-2
restrictions 13-1
trunking E port mode. See TE port mode
trunking ports
associated with VSANs
15-8
trunking protocol
default settings
13-7
default state 13-2
description 13-2
detecting port isolation 13-2
trunk mode
configuring
13-3
U
unique area FC IDs
configuring
11-17
description 11-17