Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
5-13
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 5 Fabric Manager Client
Fabric Manager Client Quick Tour
If a switch or director is grayed out, Fabric Manager can no longer communicate with it.
The bottom of the Fabric pane has the following tabs:
• Fabric—When displaying multiple fabrics, each fabric has its own tab. You can switch between
fabrics by clicking on their respective tabs.
A red X through a device or link indicates that the
device is down or that the ISL is down.
Fibre Channel HBA (or enclosure).
Fibre Channel target (or enclosure).
iSCSI host.
Fibre Channel ISL and edge connection.
Fibre Channel SAN port channel.
Fibre Channel over Ethernet (FCoE) connection.
IP ISL and edge connection.
IP port channel.
NPV connection.
Fibre Channel loop (storage).
IP cloud (hosts). This icon is also used to represent
a fabric when viewing a SAN (multiple fabrics) in
the Fabric Manager Fabric pane.
Any device, cloud, or loop with a box around it
means that there are hidden links attached.
Table 5-3 Fabric Manager Graphics (continued)
Icon or Graphic Description