Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
5-17
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 5 Fabric Manager Client
Fabric Manager Client Quick Tour
Step 4 Click OK to save the group.
To add a switch or end port to an existing group in Fabric Manager, perform this task:
Step 1 Right-click a switch or end device and choose Group > Add To > YourGroupName.
You see the Edit User Defined Group dialog box as shown in Figure 5-9.
Step 2 Use the arrows to move additional switches or end ports from the Available column to the Selected
column.
Step 3 Click OK to save the updated group.
To filter the display by a group you have created, perform this task:
Step 1 Expand the Groups folder in the Logical Domains pane.
You see the list of groups that you have created as shown in Figure 5-10.
Figure 5-10 Group Highlighted in Fabric Pane Map
Step 2
Click the name of the group that you want to filter.
In the Fabric pane, the switches or end devices in your group are shown normally; all other switches and
end devices are shown in gray.
Step 3 Click the Groups folder in the Logical Domains pane to return the display to normal.
Note User-defined group tables are filtered based on switches in the group except for switches where
CFS-controlled features are enabled when all CFS member switches are displayed to avoid
misconfigurations.