Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
6-2
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 6 Device Manager
Launching Device Manager
Launching Device Manager
You can launch Device Manager either from your desktop or from Fabric Manager.
To launch Device Manager from your desktop, double-click the Device Manager icon and follow the
instructions described in the “Integrating Cisco Fabric Manager with Other Management Tools” section
on page 2-18.
To launch Device Manager from Fabric Manager, perform one of these tasks:
• Right-click the switch you want to manage on the Fabric pane map and choose Device Manager
from the menu that appears.
• Double-click a switch in the Fabric pane map.
• Select a switch in the Fabric pane map and choose Tools > Device Manager.
Using Device Manager
This section describes the Device Manager interface as shown in Figure 6-1.
Figure 6-1 Device Manager, Device Tab
Menu Bar
The menu bar at the top of the Device Manager main window provides options for managing and
troubleshooting a single switch. The menu bar provides the following options:
1 Menu bar 4 Legend
2 Toolbar 5 Status
3 Tabs