Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-74 Fabric OS Command Reference Manual

Publication Number: 53-1000240-01

chassisConfig

Note: Enter commands in lowercase only; mixed case is for readability.

Examples To display the current configuration option on a SilkWorm 48000 director and to change the option:

See Also configDownload, configUpload, slotShow

switch:admin> chassisconfig

Current Option: 5

All Supported Options (With Blade ID 5 on slots 5-6)

----------------------------------------------------

Option 1: One 128-port switch

(Blade ID 4, 17 on slots 1-4, 7-10, Blade ID 5, 16 on slots 5-6)

Option 5: One 384-port switches

(Blade ID’s 17, 18, 24, 31, 36 in slots 1-4, 7-1, Blade ID 16 in slots 5-6)

Please use slotshow to see the Blade IDs currently in the system.

switch:admin> chassisconfig 1

This will reboot all the CPs and restore most configuration data to factory

defaults. This includes, but is not limited to, port swap, routing, zoning,

performance monitoring, port config, fabric watch, management server,

time server, snmp, security, fabric and other FabOs configuration parameters.

Traffic will be disrupted and both the CPs comes up and will vary in the number

of switches and the Blade IDs they recognize based on the configuration

selected. Some configuration values are applicable to both single-domain and

multiple-domain switches, and are therefore not modified. (Examples: licenses,

IP addresses, host and switch names, SSL certificates, PKI certificates.) Please

read the man page for further information.

Please upload switch 0 configuration...

Server Name or IP Address [host]: 192.168.79.240

User Name [user]: ckonchad

File Name [config.txt]:

Password:

Upload complete

Are you sure you want to continue? (Y/N): y

Current Option changed to 1

Restoring switch 0 configuration to factory defaults... done.

(Telnet connection goes down at this point.)