Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

Fabric OS Command Reference Manual 2-79

Publication Number: 53-1000240-01

chipRegShow

Note: Enter commands in lowercase only; mixed case is for readability.

chipRegShow

Displays the port registers for a given chip number.

Synopsis chipregshow [slotnumber/]chipnumber [filter]

Description Use this command to display the ASIC pair register contents for the specified chip on the specified blade

slot.

ote

The output of this command is for support use only.

The command is supported only on SilkWorm 200E,3250, 3850, 3900, 4100, 24000, and 48000

platforms.

ote

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

[slotnumber/]chipnumber

Specifies the index of the chip within the specified blade to display. The default is

set to 0 and designed to operate on fixed-port-count products.

filter Specifies a filter string.

Examples To display the port registers of a chip: