Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)
2-84 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
configDefault
2
Note: Enter commands in lowercase only; mixed case is for readability.
configDefault
Restores the system configuration to default values.
Synopsis configdefault
Description Use this command to reset a subset of configuration settings to the default values.
With the exception of the following, all configuration parameters are reset
to their default values (see configure):
• Ethernet MAC address, IP address, subnetmask, and boot ROM parameters
• IP gateway address
• License keys
• OEM customization
• Product ID and Vendor ID
• SNMP configuration
• iSCSI configuration
• System name
• Chassis name
• World Wide Name
• Brocade Advanced Zoning configuration (includes aliases, zones and configurations)
• Security parameters and policies
• User account passwords (includes all user config and all built-in accounts)
• Switch PID format
• Ethernet Link Mode
N
ote
Refer to the configure command for more information on default values for configuration parameters.
This command cannot be executed on an enabled switch. You must first disable the switch using
switchDisable.
Some configuration parameters are cached by the system. To avoid unexpected system behavior, reboot
the system after exciting this command.
N
ote
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none